DrainSmart System is designed and specially programmed to sense when the water levels in your pool, spa, pond, or water feature are too high. The water level sensor in the pool will automatically sense when the level is too high and wirelessly communicate this information to the valve controller to open the valve in your drain plumbing to release water to maintain the perfect water level.  With a simple retrofit install, built-in fail-safe, and American-made quality you will never have to worry about your pool's water level becoming too high again.  

The DrainSmart System is simple.  Our sleek sensor is adhered above the desired water line in the skimmer and checks the water level every 30 minutes. If the sensor senses water it will know the water level is too high and therefore signal for the valve to open and drain the pool. 

The DrainSmart™ is a retrofit system that ensures your pool does not overflow. Our sleek sensor is adhered above the water line in the skimmer, and checks the water level every 30 minutes. If the sensor senses water, partly or fully submerged it will know the water level is too high and therefore signal for the valve to open and drain the pool. A built-in fail-safe only allows the valve to be open for 7 minutes at a time, but it will check again 30 minutes later.  

• DrainSmart™ Valve Controller
• DrainSmart™ Sensor
• 1" Hunter Valve
• Antenna Tip
• A/B Putty Adhesive
• Accessory pack

Yes, you can have a DrainSmart and LevelSmart units within the same area and they will not affect one another. We use technology that allows each sensor to only communicate with the controller it is paired with. As long as you pair the units at different times there will be no issues. Most commonly customers use separate units for their pool, spa, and water features.

Yes, the Sensor is 100% wireless and discrete to be out of sight and out of mind. The sensor is wireless and waterproof, ensuring long-lasting communication and leveling.

Yes. The sensor will live in the catch basin and there is no issue with the sensor being completely submerged. However, the sensor should not be installed near waterfall aspect of this type of pool.

The DrainSmart operates with a standard 110V 3 pin plug and a transformer that’s supplied in the kit and brings it down to 24V to power the controller and the valve.

The DrainSmart Sensor adheres to your pool with a marine grade A/B epoxy. When mounting your Sensor you will need to knead the epoxy to effectively mix the components and apply it to the back of the Sensor.