LevelSmart™ Wireless Autofill

Features

• No Deck Destruction
• Simple Retrofit
• 1000 feet Wireless Range
• Rapid and Easy Installation
• Never Over-fills (Fail-safe Timer)
• Made in the USA

Retrofit Capability:
LevelSmart™ Wireless Autofill features an extraordinarily simple installation process that features no deck destruction or need for new plumbing. We utilize wireless technology and the pre-existing plumbing to retrofit on any existing construction.  LevelSmart™ can also be installed on any new construction project. The retrofit capability eliminates the need for deck destruction, reconstruction, and hours of labor. The LevelSmart™ is the perfect solution for all your autofill needs. 

Proprietary Technology:
The LevelSmart™ uses innovative and patented proprietary sensing methods along with state of the art communication technology which provides the LevelSmart™ a competitive advantage and unmatched dependability. Our engineers have created the perfect solution for all automated filling applications.

Durable Design:
LevelSmart™ is the only dependable, yet durable, pool autofill available. The float valve pool leveler is commonly used, however, due to mechanical failure they are replaced often. The float valve pool leveler was originally designed for toilets where they are only in motion 5-10 times a day. However, when float valves are used for other applications, they are repeated motion, which leads to failure in the seal.  The failure in the seal results in a water leak and a high risk of overflow.  

What’s Included in the LevelSmart 25’ Kit: 

• LevelSmart™ Water Level Sensor 
• LevelSmart™ Remote Valve Controller  
• 1” Threaded Hunter Valve  
• 25’ Antenna Extension 
• Antenna Tip 
• 110V (or 240V) Power Supply
• Unit of Marine Epoxy   
• Wire nuts  (2)
• 1” Screws (2)

Choosing Antenna Length!

We suggest selecting enough feet so the antenna tip will be seen from the sensor location and the equipment pad, or designated fill line location. This will ensure you will have a smooth pairing process and successful communication.

How it works

The LevelSmart™ Sensor wakes up every 30 minutes to check the current water level of your pool, spa, water feature or tank and then wirelessly communicates the information to the Valve Controller. If the current water level is measured below the set level, the Valve Controller will then open the Valve for 7 minutes. The Valve Controller will turn off the Valve after 7 minutes as a failsafe against over-fill. Again, in 30 minutes, the Sensor will check the water level and, if needed, fill for 7 minutes. The Valve Controller will only open the Valve if the current water level is below the level set by the user during installation.

The Valve is plumbed into the manual fill line, or it is "T'd" into the return lines, from a water source. The Valve Controller can then open and close the Valve to fill your pool as needed. 

Video