The LevelSmart™ Wireless Autofill is the ultimate solution for hassle-free pool autofill. Whether you have a pool, spa, pond, tank, or water feature, LevelSmart™ is the dependable and simple retrofit you need. With American-made quality, this pool autofill system is the most reliable on the market. Say goodbye to manual filling and let the LevelSmart™ Wireless Autofill take care of maintaining your desired water level, ensuring a stress-free pool experience.

• 1,000 feet of wireless communication
• Compact design
• Simple retrofit installation
• Adjustable fill rate
• Maintains desired water level
• Over-fill protection
• Uses existing plumbing
• Compatible with AMI Smart meters
• Checks water level every 30 minutes

The LevelSmart™ Sensor wakes up every 30 minutes to check the current water level of your pool, spa, water feature or tank and then wirelessly communicates the information to the Valve Controller. If the current water level is measured below the set level, the Valve Controller will then open the Valve for 7 minutes. The Valve Controller will turn off the Valve after 7 minutes as a failsafe against over-fill. Again, in 30 minutes, the Sensor will check the water level and, if needed, fill for 7 minutes. The Valve Controller will only open the Valve if the current water level is below the level set by the user during installation. The Valve is plumbed into the manual fill line, or it is "T'd" into the return lines, from a water source. The Valve Controller can then open and close the Valve to fill your pool as needed.

• LevelSmart™ Sensor
• A/B Putty Adhesive

Instruction Manual

Quick Start Guide

Video Library

Yes, you can have many LevelSmart units within the same area and they will not affect one another. We use technology that allows each sensor to only communicate with the controller it is paired with. As long as you pair the units at different times there will be no issues. Most commonly customers use separate units for their pool, spa, and water features.

Yes, the Sensor is 100% wireless and discrete to be out of sight and out of mind. The sensor is wireless and waterproof, ensuring long-lasting communication and leveling.

Yes. The sensor will live in the catch basin and there is no issue with the sensor being completely submerged. However, the sensor should not be installed near waterfall aspect of this type of pool.

The LevelSmart operates with a standard 110V 3 pin plug and a transformer that’s supplied in the kit and brings it down to 24V to power the controller and the valve.

The LevelSmart Sensor adheres to your pool with a marine grade A/B epoxy. When mounting your Sensor you will need to knead the epoxy to effectively mix the components and apply it to the back of the Sensor.